Series Vents PSS 102

Wall-mounted ventilators for supply ventilation with a solar panel

The wall-mounted ventilator is an air supply unit for permanent ventilation and is intended for supplying both residential and non-residential premises with fresh air.
The PSS ventilator is a cost-effective and stand-alone unit for more intensive air exchange compared to passive ventilators.
The ventilator allows you to fill a room with fresh air without opening windows and without letting dust, street noise and plant pollen into the room.
The specially designed internal grille, as well as the free area regulator, ensure a uniform supply and distribution of fresh air in the room.
The ventilator is installed on the sunny side of the outer wall of an apartment, cottage, office building, etc.

In the updated version of the ventilator, the outer hood is more advanced in design.

FEATURES

Designed for ventilation of small and medium-sized premises.
The solar battery provides more intensive air exchange than with conventional passive ventilation.
Energy-efficient due to the use of solar energy.
Operational independence. The motor is powered by a solar battery. The motor supply voltage is 9...18 V. The electrical parameters of the battery vary according to the intensity of the solar flux. The intermediate parameters are shown in the table.
During nighttime, the ventilator functions as a passive ventilation element.
Manual adjustment of the free area is possible.

STRUCTURAL ELEMENTS

The ventilator consists of two ventilation grilles (indoor and outdoor ones) and a telescopic air duct with a fan.

Indoor grille

Telescopic air duct

Outdoor grille

The indoor grille is made of high-quality plastic and is equipped with a G3 class dust filter (SF 143х143х10 G3). The built-in regulator makes it possible to change the supply air volume or completely close the ventilation duct.
Telescopic air duct with adjustable length.
The outdoor grille (ventilation hood) is made of high-quality plastic. A solar panel is attached to the surface of the hood to power the motor.

AIR FLOW DISTRIBUTION

The design of the internal grille and the free area regulator ensure a uniform supply and distribution of fresh air in the room.
You can adjust the air intake intensity smoothly as required.